Pressure Gear Pump

Gear pumps are highly versatile. Although they are typically used for thin liquids such as solvents and fuel oil, they excel in handling applications across various industries including petroleum, chemical, coatings, dyes, food, (lubricants/fats), pharmaceuticals, and more.

Send Inquiry

Product Introduction

In addition to their wide viscosity range, these pumps also offer an extensive temperature range due to the single-point end clearance. This clearance can be adjusted to accommodate high temperatures, maximize efficiency when handling high-viscosity fluids, and compensate for wear.

Gear pumps provide smooth, pulse-free flow, are self-priming, and can run dry for short periods. They are also bidirectional, meaning the same pump can be used for both loading and unloading containers. With only two moving parts, gear pumps are reliable, easy to operate, and simple to maintain.

Features

- Axial and radial pressure compensation design ensures high volumetric efficiency even at low speeds and with low-viscosity fluids.

- Ultra-low noise operation due to high-strength cast iron construction and unique internal noise-reduction design.

- Extremely low flow and pressure pulsation, maintaining stable output even at low speeds.

- High-pressure capability, with maximum operating pressure reaching 25–35 MPa.

- Broad speed range, with maximum speed up to 3000 rpm.

- Can be combined to form duplex pump units.

- Insensitive to fluid contamination, resulting in a long service life.

- Widely suitable for industrial hydraulic systems such as those in plastic machinery, shoe-making equipment, die-casting machines, and forklifts. Particularly ideal for energy-saving systems with servo frequency conversion drives.

Factory Instance

FAQ

1.Q: What is the maximum depth of silos that your silo cleaning machines can handle?

A: The maximum silo depth our machines can handle is 50m. For deeper silos (over 50m), we can customize the length of the cleaning arm and enhance the power system to ensure efficient cleaning.

2.Q: How does your silo cleaning machine avoid damaging the silo wall during operation?

A: The cleaning head of our machine is equipped with a soft rubber buffer layer, and there is a distance-sensing device between the machine and the silo wall. When the distance is less than 10cm, the machine will automatically adjust the moving direction to prevent direct collision with the silo wall.

3.Q: What is the cleaning efficiency of your silo cleaning machine?

A: The cleaning efficiency depends on the type of material and silo size. For coal silos with a diameter of 8m, it can clean about 50-80 tons per hour; for grain silos, the efficiency can reach 80-120 tons per hour, significantly reducing manual cleaning time.

Hot Tags: pressure gear pump, China pressure gear pump manufacturers, suppliers, factory, motor pump hydraulic, hydraulic pump and valve, hydraulic gauge, compact hydraulic pump, Pressure Vane Pump, hydraulic pump control

Pressure Vane Pump

No Information